Product Highlights
5G Sub-6GHz + LTE support dual mode, so that device can combine 5G and LTE connection, or go 5G or LTE upon reception quality of each mode respectively
For outdoor scenario Support, variety of outdoor installation scenarios, IP65 design for water and dust resistance
4*4 MIMO 5Gbps High throughput HTTP and TR-069 management support
Lightening Protection: ±6kV
Built-in 5G/LTE LGA modem for Connecting to 5G/LTE network.
One 2.5 Gigabit Ethernet LAN port to connect to POE injector or CPE
Comply to 802.3af POE standard
Built-in 5G/LTE antenna design
Plug-and-Play with Ethernet interface
Easy-to-use web interface for advanced configuration
Features
Convenient Wireless Broadband Access
V5G1010O ODU is a most advanced 5G cat.20 outdoor data unit specially designed to meet the most challenging demands of today's high-speed wireless backhaul and fixed wireless access deployments by the 5G service operators.
V5G1010O ODU provides 2.5 Gigabit PoE connection for terminal device such as router or Wi-Fi AP products. The PoE interface can also work with standard PoE switches or router products. The product comes with PoE power adapter and amounting bracket accessories for quick and convenient installation.
Reliable Performance
V5G1010O ODU is designed to meet the stringent operation environment for outdoor CPE devices. The device can safely operate in a wide temperature ranging from -40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 5G 900Mbps max throughput over the air.
Easy To Use & Manage
V5G1010O ODU is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer the experience of surfing over Internet. The LEDs on the V5G1010O ODU have also been designed for user convenience, and offers a clear indication of working status. The IP addresses can be dynamically obtained via DHCP.
V5G1010O ODU offers rich management features to facilitate the task of carrier. It supports local management access, Http, Https and standard TR069 remote OTA management including device configuration, monitoring, and upgrades management.
Technical Features
V5G1010O ODU design is based on the standard implementation of 5G NR SA and 5G NR NSA specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability. V5G1010O ODU is a 5G CPE and supports advance features such as 4x4 MIMO, Carrier Aggregation, QAM256 modulation on the downlink. With high gain omnidirectional antenna, V5G1010O ODU enables a longer reception range from the base station. This yields more efficient use of the network with a larger cell reach, guaranteed carrier class service, and customer service probability.
Built for the Outdoors
The industrial grade casing means that the 5G ODU provides reliable high-speed connectivity in extreme conditions. Specially built for outdoor use, the IP65 corrosion-resistant housing helps protect it from extreme weather. Wall mounting, Pole mounting, and sturdy bracket allow the device to be installed anywhere for optimal connectivity, and withstand wind speeds up to 210kph.
Specifications:
Device Interfaces | 1*2.5Gbps GE Ethernet Port |
6*LED Indicator PWR, LAN, 5G, 3*Signal Strength LEDs | |
1.8V SIM Card Slot (2FF) | |
Reset Button | |
Standards | IEEE 802.3i 10Base Ethernet |
IEEE 802.3u Fast Ethernet | |
IEEE 802.3ab Gigabit Ethernet | |
IEEE 802.3bz 2.5Gigabit Ethernet | |
IEEE 802.3af 12.95W POE | |
5G/ LTE Chipset | Qualcomm SDX55 |
5G/ LTE Standards | Release 15, Cat.20 |
5G NR | |
5G/ LTE Frequency Support | 5G NR SA: n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n77/n78 |
5G NR NSA: n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n77/n78 | |
LTE FDD: B1/B3/B5/B7/B8/B20/B28/B32 | |
LTE TDD: B38/39/B40/B41/B42/B43 | |
5G/LTE Throughput | 5G SA Sub-6: DL 4.2Gbps; UL 900Mbps |
5G NSA Sub-6: DL 5Gbps; UL 650Mbps | |
LTE: DL 2.0Gbps; UL 150Mbps | |
MIMO | DL: 4*4 UL: 2*2(only Support 5G SA) |
Output Power | 23dBm±2dBm |
Antenna | 3~7dBi Internal Directional Antenna |
Device Management | HTTPS Management Interfaces |
Standard Based TR-069 Management | |
HTTP OTA Firmware Upgrade | |
USIM and Network PLMN Locking Support | |
Device Factory Default Setting | |
Networking Configuration | DHCP IP Address Assignment |
Router Operation Support | |
Built-in DHCP Server for LAN Devices | |
IPv4, IPv6 DS-Lite Support | |
NTP Service Support | |
SIM Card Locking Feature | |
Network Selection and Cell Locking Provision | |
Physical | |
Dimensions | 330(H)*250(W)*85(D)mm |
Weight | <2.5Kg |
Enclosure | IP 65 |
Power Protection | +/-6kV |
Power | 48V Power over Ethernet |
Power Consumption | < 10W |
Temperature | Operating:-30 to 75 °C |
Storage:-40 to 85 °C | |
Humidity | 10 % to 95 % Non-condensing |